04.5-05 GMC Chevy Duramax 6.6L LLY Billet Compressor Wheel Rebuild Repair Kit

Billet Compressor Wheel Rebuild Repair for 04.5-05 GMC&Chevy Duramax 6.6L Stock Turbo Only \n

-Application:

\nStock turbo parts Fitment - No modifications required. \n \n2004.5-2005 GMC / Chevy Duramax LLY 6.6L Stock Size Turbo ONLY \n \n-Item Details: \n \nBillet compressor Wheel Inducer: 63.40mm \n \nBillet compressor Wheel Exducer/Tapered Tip Exducer: 88.1mm/91.8mm \n \nBillet compressor Wheel Blade Height: 31.31mm \n \nBillet compressor Wheel Bore: Threaded-M7x1.0LHT \n \nBillet compressor Wheel Blades: 11+0 \n \nStepped gap seal ring on the turbine end \n \nStepped gap seal ring on the compressor end \n \nTwin hydrodynamic journal bearings \n \n360-degree thrust bearing system \n \nThis rebuild kit contains: \n \n1*BILLET COMPRESSOR WHEEL \n \n1*SEAL O-RING \n \n1*360 DEGREE THRUST BEARING \n \n1*THRUST COLLAR \n \n1*THRUST SPACER \n \n3*SEAL PLATE BOLT \n \n2*JOURNAL BEARING \n \n1*BEARING SPACER \n \n1*SMALL SEAL O-RING \n \n5*HOUSING BOLT \n \n1*COMPRESSOR END SEAL RING(STEPPED GAP) \n \n1*TURBINE END SEAL RING(STEPPED GAP) \n \n-Special Note: \n

\n
1. This billet compressor wheel is not compatible with 05-07 56.8mm Inducer. Please check DOUBLE your sizing prior to purchase.
\n
2. Professional installation is highly recommended! Please ask all questions prior to purchase!
\n
3. Highly recommended to get the CHRA VSR balanced after rebuild (is required for warranty purposes)!
\n

\n