Mini Cart

  • No products in the cart.

Ford Racing 2021 Bronco 17x8.0 Beadlock Carbonized Gray Badlands Wheel Kit

$725.00

In Stock
sold in last hours

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom...

Order in the next to get it by
Free Shipping For Over $100 to

Description

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

This Part Fits:

Year Make Model Submodel
2021-2023 Ford Bronco Badlands
2021-2023 Ford Bronco Base
2021-2023 Ford Bronco Big Bend
2021-2023 Ford Bronco Black Diamond
2022-2023 Ford Bronco Everglades
2021 Ford Bronco First Edition
2023 Ford Bronco Heritage Edition
2023 Ford Bronco Heritage Limited Edition
2021-2023 Ford Bronco Outer Banks
2022 Ford Bronco Raptor
2021-2023 Ford Bronco Wildtrak

Reviews

Custom Tab

care-icon

LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.